Getting Started with Baulogic

We imagine most contractors have been sent a box of parts and expected to build a system on site in limited time, one that they didn’t design in the first place? And they’ve certainly spent too many hours searching for the cause of various faults.

Many systems require extensive panel wiring, a device identification process and programming whilst building work continues around the contractor.

Simply put, the Bauloigc system has been designed to avoid all of these issues. Your contractors can concentrate on the simplified cabling according to a pre-agreed plan. We’ve done all the complex internal cabling already. We send the whole system pre-programmed to your specification and clearly labelled so each device is correctly located and ready to work. The system even auto adjusts for different loads on the dimmers to provide optimal lighting from the very first power on.

No. The Baulogic system is a wired system and has its own local control links. Assuming the fault is confined to your broadband line or equipment the Baulogic system will carry on as normal. Some features such as remote control from your phone and connected help from our support team will be unavailable until the internet is restored. Your heating, lighting and even the touch panel will be unaffected by internet availability.

Yes. A control App for all the features is available for Apple and Android devices.

We offer a few different types of switches. We have carefully selected one particular range of switch because it operates and looks very similar to a regular light switch – no lights, or displays just simple ‘rocker’ switches. Unlike a normal switch these switches can be programmed to make simple actions like lights on/off or whole home actions like ‘Goodnight’ which can turn off all the lights and the heating and hot water.

Yes. Whether the properties form a gated development or apartment block, or even a single unit with electric gates the Baulogic system can control the access systems. In communal blocks this is achieved by a Comms Server which also allows personal or block messaging by a Concierge or Maintenance Manager.

The main difference is the separation of switches which are on the bus cable and the lights which are on dedicated radial circuits. This means that all the cabling from lights to switches is removed. So whether its one way, two way or intermediate switching it is not required. This is simpler, quicker and very likely to work first time. There are no hard to find ring earth faults and for quick connection to the heating system and control box we include all the necessary WAGO connectors for a reliable push-click fit.

The Baulogic system creates visible difference. Whether between types of, say, four bed properties or different floors in an apartment block having the system is a clear difference. Once installed the system can be equipped with different numbers or grades of switches, additional lighting circuits or security cameras and even features bespoke to a property design.

No. You can use our system to better differentiate premium plots or apartment floors. You might also highlight the difference between different grades of properties i.e 4 bed type 1, 2 or 3.

No. We have designed this system specifically to allow a qualified electrical contractor to install the system. Our connectors are widely recognised push fit WAGO connectors, and regular RJ45 CAT5/6 cable terminations. The KNX bus cable is single strand black/red block termination. Better still we remove the potential for all those ring, two-way and intermediate switch wiring errors and subsequent return visits. Any complexity (if there is any) is safely hidden away in our factory configured software.