Getting Started with Baulogic

Absolutely. The Baulogic system has its own wired control network. Unlike well known consumer devices that are controlled via phone Apps our system is wired for reliability and locally controlled.

Yes, our underfloor heating module controls up to 8 zones via actuators. Each room temperature sensor is invisibly integrated into our smart switches. Schedules and set-points can be easily controlled from the touch panel or App, with settings per room or in groups for fast, clear programming.

Our ordering and delivery processes direct from our UK factory will not impact on your build schedule. We really do believe the Baulogic system removes much of the complexity of modern house wiring, and despite the sophisticated system to be enjoyed by your home buyers, the installation will be simple and trouble-free.

We imagine most contractors have been sent a box of parts and expected to build a system on site in limited time, one that they didn’t design in the first place? And they’ve certainly spent too many hours searching for the cause of various faults.

Many systems require extensive panel wiring, a device identification process and programming whilst building work continues around the contractor.

Simply put, the Bauloigc system has been designed to avoid all of these issues. Your contractors can concentrate on the simplified cabling according to a pre-agreed plan. We’ve done all the complex internal cabling already. We send the whole system pre-programmed to your specification and clearly labelled so each device is correctly located and ready to work. The system even auto adjusts for different loads on the dimmers to provide optimal lighting from the very first power on.

No. The Baulogic system is a wired system and has its own local control links. Assuming the fault is confined to your broadband line or equipment the Baulogic system will carry on as normal. Some features such as remote control from your phone and connected help from our support team will be unavailable until the internet is restored. Your heating, lighting and even the touch panel will be unaffected by internet availability.

Yes. A control App for all the features is available for Apple and Android devices.

Yes. Whether the properties form a gated development or apartment block, or even a single unit with electric gates the Baulogic system can control the access systems. In communal blocks this is achieved by a Comms Server which also allows personal or block messaging by a Concierge or Maintenance Manager.

The main difference is the separation of switches which are on the bus cable and the lights which are on dedicated radial circuits. This means that all the cabling from lights to switches is removed. So whether its one way, two way or intermediate switching it is not required. This is simpler, quicker and very likely to work first time. There are no hard to find ring earth faults and for quick connection to the heating system and control box we include all the necessary WAGO connectors for a reliable push-click fit.

No. We have designed this system specifically to allow a qualified electrical contractor to install the system. Our connectors are widely recognised push fit WAGO connectors, and regular RJ45 CAT5/6 cable terminations. The KNX bus cable is single strand black/red block termination. Better still we remove the potential for all those ring, two-way and intermediate switch wiring errors and subsequent return visits. Any complexity (if there is any) is safely hidden away in our factory configured software.